How to Get Rid of Red Light on Virgin Router?

What does it mean to see a red light on the Virgin Media router? Do you have the same question on your mind? We have the answer. We can also help you in getting rid of the light.Virgin Media router lights are meant to help you understand your router’s working status. A red light usually indicates an overheated router. What you should do in order to turn the red light off is what you will find in this guide. Thus, read on.

Let’s Fix Red Light on Virgin Router!

As we mentioned above the red light on Virgin router means your router is overheated. Perhaps you have been using your router continually and the location where it is placed is not well ventilated. Therefore, the very first step should be to power it off and give it some rest.

Turn Off Virgin Router

• Power off the Virgin router using the power button.
• Take out the power cable from its outlet.
• You can shift the router to an open and ventilated place.
• Let it sit in the idle state for about 30 minutes.
• Meanwhile, observe all the cables and wires connected to it. They should not be damaged or loose.
• After you have waited for sufficient time, plug in the router back and turn it on.
• When it boots up fully, check if the red light still appears.

In case you are still struggling with the red light on your router and there’s no internet also then you should go for the factory reset.

How to Factory Reset Virgin Router?

• The Reset button on the Virgin router is located inside the pinhole labeled Reset.
• Use a sharp object with a pointed end to press the button.
• Hold it for about 10 seconds.
• Now, release the button and wait till the router boots back.

The Virgin router has restored the default factory settings on it.You have given your router a fresh start. It has returned to the same state it was in when you purchased it.

We expect that the red light on Virgin router is no longer bothering you.

Reconfigure Virgin Media Router

You should now reconfigure the router.

• Connect the router to the wall internet outlet using the connector.
• Plug in and supply power to the router.
• Let the connection establish.
• The base light turns on when the connection is made successfully.

You can now access the Virgin Media router login page on a browser and go to its dashboard to configure its settings.

All in All

This way you can get rid of the red light on Virgin router. We suggest you choose a location that’s well-ventilated and open to avoid overheating. Also, make sure that you often reboot your router by powering it off and on.

We hope that we have provided you with sufficient information on the issue that you were struggling with. Now that your router is working good, you can without any hassle, connect to its internet and have an amazing online experience.