Unable to Get through Hub 3 in Modem mode using 192.168.100.1
If you are unable to access the Virgin Media Hub 3 in Modem Mode by using the IP address 192.168.100.1, then you need to check whether your Virgin router is set to modem mode or not. Also, use the right steps to access the Virgin Media Hub 3 in Modem Mode. Here in this blog, we discuss in detail the reasons and their solution for which Unable to Get through Hub 3 in Modem mode using 192.168.100.1. Let’s begin:
Reasons behind this Issue
- The Hub 3 router is not set to Modem mode.
- You can check it by accessing the setup page using IP 192.168.0.1.
- Using an Incorrect IP address to access the page.
- An outdated Web browser is used for login.
- The router has Outdated Firmware.
- Sometimes users do not enable the Modem mode of the Virgin Media Hub 3 router. So here you need to set the router as a Modem.
- To enable Modem Mode, go to the web browser type 192.168.0.1 into the search bar, and perform virgin router login
- On the web interface, go to the settings enable the Modem Mode of the router and try again to access the router in modem mode.
- Always use the updated version of the browser to log in.
- Use the correct IP address to access the login page. And use the Correct Login details to log in.
- Clear all the cache and cookies of the browser and disable VPN software while accessing the web page.
- These steps will solve your problem of being Unable to Get through Hub 3 in Modem mode using 192.168.100.1.
- Before accessing the interface, ensure that your router getting proper supply or not. If not then solve it.
- Check all the power and network cables are in good condition and connect to their respective ports.
- If the problem is not solving, then reset the router to restore its factory default settings.
- Outdated Firmware is also a reason behind unable to get through Hub 3 in Modem mode
- To update Firmware, go to the web browser and access the web interface of the by performing virgin
router admin login. - Then go to Settings > Advanced Settings > Upgrading Firmware, here download and install the latest Firmware files.
Troubleshoot This Issue
Enable Modem Mode
Check Browser’s Settings
Check Physical Connection
Update Latest Firmware
Conclusion
In the above blog, you learned how to solve the problem of being unable to get through Hub 3 in Modem mode using 192.168.100.1. You need to take some troubleshooting tips that help you to solve this problem.