Virgin Hub 3 in Router Mode – Password forgot (Solution)

The Hub 3 is a networking device that you can set as the modem as well as the router. You can change the mode from the interface, but of you have forgotten the admin password. To access the admin interface, you have to do the below solutions.

How to Access Admin If Password Forgotten?

There are only one way to access the admin window of the hub 3 is to reset it properly. Then you can change the admin credentials of the hub and turn it in the modem or router mode.

Reset Whole Hub Network

The reset process is easy and simple. It is initiated from the RESET button given on the Virgin hub 3 back. You just have to follow below written steps:

• Navigate the RESET button on the back of the device.
• Press and hold it for 10 seconds using sharp objects.
• By releasing the button, the process will start.
• It will end after few minutes and then you must re-configure.

Reconfigure Virgin 3.0 Hub

There are simple steps to configure the device (Virgin hub 3) with the help of computer or laptop;
Virgin router login interface. Follow the steps:

• Connect computer to the hub 3 with the help of Ethernet cable.
• Then, open the web browser it should be updated one.
• Search the IP address of the Hub 192.168.0.1 on browser.
• You will get to the interface login page.
• Here, you have to enter the default username and password.
• You will access the device interface here you can configure the device.

Change Virgin Hub 3.0 Password

Now, you should change the hub password from the interface in your computer. Have a look at the steps:

• Access the interface with the help of the IP address.
• Here, go in to the management option.
• Click on the Virgin router admin button.
• Enter the username and password (new ones).
• Check it and note it. Then SAVE the changes.

The Conclusion

From this post, you have seen and learned about how to solve the (Virgin Hub 3.0 password) Virgin Hub 3 in Router Mode – Password forgot issue.